Have you ever wondered if the passwords for Wi-Fi networks may be hacked on a mobile device? By any means is it not simple to crack the password of any Wi-Fi connection. However, it is not impossible. A Wi-Fi password can be hacked in a few different ways. Here we provide a complete guide on how to hack Wi-Fi passwords on Mobile.

So, if you’re curious in understanding how to hack a Wi-Fi password on a mobile device, keep reading! We need to start with the basics before we move on to share Wi-Fi password hacking tips and methods with you. To grasp the hacking tips, you must first understand the different types of Wi-Fi security.

This post will help you if you wish to enhance your understanding and learn the techniques and strategies for hacking the Wi-Fi password using an Android handset. Many people are curious about how to hack Wi-Fi passwords on Android and whether or not it is possible. The simple answer is that you can use several tactics and tools to crack Wi-Fi passwords on Android devices.

Before we get into our main topic of how to hack Wi-Fi passwords on Android phones, let’s go over the essential information.

Types of Password Security On Wi-Fi Connections

WEP (Wired Equivalent Privacy) is the most commonly used Wi-Fi security mechanism around the world. However, it is the weakest form of security and is also the easiest to break into.
WPS (Wi-Fi Protected Setup) is regarded as difficult to crack. Expert hackers, on the other hand, are required to crack it.
WPA (Wi-Fi Protected Access) was first introduced in 2003, but it has since been discovered to have a severe security weakness. As a result, it’s incredibly simple to break into Wi-Fi networks protected by WPA keys.

How To Crack Wi-Fi Networks

Cracking is the method of getting unauthorized access to wireless networks by exploiting security flaws. Exploits on networks that employ WEP to establish security restrictions are referred to as WEP cracking. Cracks can be divided into two categories:

Passive cracking– until the WEP security is cracked, this sort of cracking has no influence on network traffic. It’s a challenge to spot.
Active cracking– this form of attack causes an increase in network traffic load. When compared to passive cracking, it is much easier to detect. When compared to passive cracking, it is more effective.

Hacking Wi-Fi on Android device (without rooting)

There are 2 easiest & of course working methods of hacking anybody’s Wi-Fi password using your android mobile. For this purpose, you can use regular apps like WIBER+ app, WPS Connect app, etc. Step by step guide of Wi-Fi hacking from/ with/ through both the processing apps is being given below:

How to hack Wi-Fi network on your mobile phone using WPS Connect app

STEP 01: From the Google Play store app, download & install WPS Connect app on your android.

STEP 02: Open & tap on the ‘scan’ button to start scanning nearby Wi-Fi networks.

STEP 03: While it takes some time to create a list of all possible nearby networks, wait for a while.

STEP 04: Once the list appears, details of each n every Wi-Fi networks will be shown to you for example router MAC address, password security type, network radio name, signal strength, speed in Mbps & many more….

STEP 05: Tap on the network you want to hack into. A popup box will be shown to you with a pre-defined list of PIN codes all according to the types of Wi-Fi router.

STEP 06: Choose ‘try’ button to begin the process (hacking) by simply tapping on the very 1^st PIN code. The following process will take a meanwhile to be processed completely.

NOTE: This app will give you some suggestions to increase your chances of hacking if the PIN didn’t match. Else, you can tap on ‘cancel’ & then retry connecting to the network by selecting/ choosing some other PIN code from the list.

If the selected PIN gets matched with the selected or chosen Wi-Fi router then, the app will show you the name of Wi-Fi connection along with its password.

How to hack Wi-Fi network on your android device using WIBR+ app

STEP 01: Form its official website or from Google Play store app, download & install WIBER+ app on your android device.

STEP 02: Launch the app once installed. Select the Wi-Fi network which you want to hack from the list of nearby wireless networks.

STEP 03: You will be told to select the attack type. You can either import your own wordlist file or else can use the pre-defined word lists provided within the app if you want to perform a dictionary attack.

NOTE: It is important to note here that the minimum password length for WPA based Wi-Fi password is of eight characters. Any password that is shorter than that will be automatically skipped.

STEP 04: Start the hacking attack on the Wi-Fi network once you’ve properly made your selection. Wait for the correct password to work.

*waiting time completely depends on the length of the password because the app will try all the possible combinations of characters in the alphabet.

This app is capable to process maximum up to 8 passwords/ minute. For example, if your selected dictionary list includes 1500 words then it will take about three hours to complete the Wi-Fi hacking attempt. Also, it will consume a lot of battery power too as Wi-Fi must have to be opened all the time throughout the process.

The app will successfully connect your android device to the Wi-Fi network. Else, if it failed, then there are possibilities/ chances that the targeted wireless network was using a strong password that was not in your provided dictionary wordlist file.

DISCLAIMER: All the information provided here is only for educational & technical purpose. Trying to hack into anyone else’s Wi-Fi network without prior permission is unlawful/ illegal that may result in criminal charges. You are solely responsible for what you are doing with the provided tool and information.